Nortel BCM 3.7, Manual

Page: 192 / 1004

192 Configuring a data module
N0008589 3.3
Line assignment
You can assign one or more lines to the BayStack data module for incoming data transmission.
Adding line assignments
1 On the navigation tree, click the Resources key and click the Media Bay Modules key.
2 Click the Bus 08 key and click the Data Module key.
3 Click the Line assignment heading.
4 Click the Add button.
Or, right click the Line assignment heading and click Add .
The Add Line assignment screen appears.
5 In Line box, enter the number of the trunk or a target line you need to assign to the BayStack
data module.
6
Click the Save button.
7 Click the heading for the line you added.
8 In the Dial-in number box, enter the Dial-In Number for the line (up to 24 digits). The
number must match the Dial-In Number entered for the line and channel in BayStack data
module programming.
9 Assign additional lines to the BayStack data module as required.
Deleting line assignments
1
On the navigation tree, click the Resources key and click the Media Bay Modules key.
2 Click the Bus 08 key and click the Data Module key.
3
Click the Line assignment key and click the heading for the line you want to delete.
4 Click the Delete button.
Or, right click the heading for the line assignment you want to delete and click Delete .
A confirmation dialog box appears.
5
Click the Yes button.
Note: The data module will answer data calls only. It will not answer voice calls.