Nortel BCM 3.7, Manual

Page: 436 / 1004

436 Default button assignments
N0008589 3.3
7316E digital phone button defaults
The default button assignments for the 7316E depend on the template applied. Refer to your
Programming Records to identify the current button programming for each telephone or group of
telephones.
• This telephone has individual handsfree, mute and headset buttons, located under the dialpad.
Handsfree must be set to automatic for these buttons to work.
• The current incoming call on this telephone defaults to the voice path last used. For example, if
you answered the previous call using your headset, the next call will come in over your headset.
• Line numbering starts on button 09.
Important note: The 7316E buttons are mapped differently than the 7316 buttons. Therefore, if
you replace a 7316 digital phone with a 7316E digital phone, the button programming will revert
to the default settings for the 7316E, losing any keys programmed by the user at the telephone.
Also, settings that are copied from one telephone to the other may be in a different location on the
new telephone. This is consistent with how the system behaves if you switch any telephone model
for a different model on the same connector.
Figure 139 7316E lower button mapping
7316E upper button defaults
Btn # Btn #
Contrast 01
05 Blank
Show time 02
06 (DID only) Sys Park
Blank 03
07 Send Message
Blank 04
08 Speed dial
7316E lower button defaults
Btn # PBX DID Btn # PBX/DID
09 Sys Park Target line 17 Call Timer
10 Saved No. 18 Ring Again
11 Call Fwd 19 DND
12 Pick-up 20 Transfer
13 Page 21 Last No.
14 Transfer 22 Voice call
15 Time/Date 23 Intercom
16 Receive Msg. 24 Intercom
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24