Nortel BCM 3.7, Manual

Page: 683 / 1004

Configuring the WAN interfaces 683
Programming Operations Guide
Modifying PVC congestion controls
Follow these steps to modify a PVC congestion control setting:
1 On the navigation tree, click the Resources key and click the WAN Key.
2 Click the WAN1 or WAN2 heading.
The WAN Summary screen appears.
3 Click the PVC Congestion Control tab.
The PVC Congestion Control screen appears.
4 Click the entry you want to modify in the PVC Congestion Control table
5 On the Configuration menu, click Modify PVC Congestion Control .
The PVC Congestion Control dialog box appears.
6 Change the PVC congestion control parameters.
7 Click the Save button.
Deleting a PVC congestion control
Follow these steps to delete a PVC congestion control setting.
1
On the navigation tree, click the Resources key and click the WAN Key.
2 Click the WAN1 or WAN2 heading.
The WAN Summary screen appears.
3 Click the PVC Congestion Control tab.
The PVC Congestion Control screen appears.
4 Click the entry you want to delete in the PVC Congestion Control table.
5
On the Configuration menu, click Delete PVC Congestion Control .
A message prompts you to confirm the deletion.
6
Click the Yes button.
WAN PPP Parameters
If you chose PPP as your link protocol, set the WAN PPP Parameters screen.
1 On the navigation tree, click the Resources key and click the WAN Key.
2
Click the WAN1 or WAN2 heading.
The WAN Summary screen appears.
3
Click the WAN PPP Parameters tab.
The WAN PPP Parameters screen appears.