Nortel BCM 3.7, Manual

Page: 885 / 1004

Configuring an analog device DN record 885
Programming Operations Guide
3
Use the information in the following table to configure an external hotline setting.
Determining analog device settings
ATA settings allow you to define general settings for analog devices.
Figure 229 ATA settings example
4 Click on the ATA settings heading in the DN record.
5
Use the information in the following table to configure ATA settings.
Table 289 Hotline values
Attribute Values Description
External External #
Facility Value:
Use line nnn
Use prime line
Pool code
Use routing table
Use this setting for modems credit card verifiers and fax machines.
Enter pause (F78) for the external number. The pause feature inserts a
1.5-second delay before the data device starts dialing.
Enter the line you want the call to use.
Use line nnn : Refer to line assignment for this analog device.
Use prime line : Refer to the General record for this analog device.
Pool code : Refer to the line pool assignment for this analog device.
Note: This heading only appears when an analog device is connected to the
system.
Table 290 ATA settings
Attribute Values Description
ATA answer
timer 3, 5, 7, 10 Select the length of delay between the last digit you dial and when the analog device
is ready to receive DTMF tone.
Keep the answer timer delay short for modems and fax machines.
Recommendation : Set this value to 3 for analog devices in the UK.