Nortel BCM 3.7, Manual

Page: 651 / 1004

LAN settings for DHCP Server 651
Programming Operations Guide
4 Click an excluded address range in the Excluded Address Range table.
5 On the Configuration menu, click Delete Excluded Address Range .
A message prompts you to confirm the deletion.
6 Click the Yes button.
Configuring Reserved addresses for a Local Scope
Reserved addresses allow you to assign IP addresses to specific DHCP clients.
You can use Reserved Addresses to assign IP addresses to devices that require a static IP address.
Adding a reserved address
1 On the navigation tree, click the Services key and click the DHCP key.
2 Click the Local Scope key and click the LAN1 heading.
The LAN Scope Specific Options screen appears.
3
Click the Reserved Address tab.
The Reserved Address screen appears.
4 On the Configuration menu, click Add Reserve Address .
The Reserved Address dialog box appears.
5 Configure the Reserved Address settings according to the following table.
6 Click the Save button.
Modifying a reserved address
1 On the navigation tree, click the Services key and click the DHCP key.
Table 162 Reserved Addresses
Setting Definition
Range (V#) Allows you to specify the Range identifier.
The range setting uniquely identifies a reserved range in the scope. The value for this setting
must follow certain conventions. You must type the prefix 'V' followed by a unique number
identifying the range in the table. For example, 'V2' is a valid name. Specify nonrecurring values
for the unique number. If you specify an existing reserved range name, the system modifies the
existing range. If you use non-sequential numbers the system automatically reassigns sequential
numbers. When you modify a reserved range, you cannot change the range name. The reserved
range name does not have any significance, other than uniquely identifying an entry.
IP Address Allows you to specify the IP Address that is reserved for this DHCP client.
Enter the IP address in the dotted format.
MAC Address Allows you to specify the MAC address for the DHCP client this IP address is assigned to.
The permitted value is 6 bytes in hexadecimal format.
Client Name Allows you to specify the name of the DHCP client.
Client Description Allows you to specify the description that will help to identify the DHCP client this IP address is
assigned to.