Nortel BCM 3.7, Manual

Page: 487 / 1004

Setting system telco features 487
Programming Operations Guide
Programming note: Ensure that users who have access to this feature have telephones with valid
OLI numbers. Refer to “Assigning line access” on page 406 .
Configuring ONN blocking service codes
Follow these steps to configure an ONN setting:
1
Click on the keys beside Services , Telephony services , and Telco features.
2
Click on ONN blocking.
Figure 167 ONN blocking parameters
3 The following table explains the possible choices for ONN blocking.
Note: When ONN is active, set and set/line restrictions are ignored. The CO call back feature is
also disabled until the feature is cancelled.
Table 104 ONN blocking settings
Field Values Description
Tone F78(0 to 9, *, #) For analog trunks, enter a digit or character to determine what code
the user will enter to activate this service.
Pulse F78(0 to 9, *, #) For digital trunks, except BRI, enter a digit or character to determine
what code the user will enter to activate this service.
BRI F78(0 to 9, *, #) For BRI trunks, enter a digit or character to determine what code the
user will enter to activate this service.