Nortel BCM 3.7, Manual

Page: 403 / 1004

Identifying the telephone (General heading) 403
Programming Operations Guide
Identifying the telephone (General heading)
The General heading allows you to assign the name, the DN type or model, a control telephone,
and a call log password for a telephone. This record also shows you which physical port the
telephone is accessing.
Figure 126 DN General screen for digital and IP telephones
Follow these steps to identify a new telephone, that has not yet been attached to the system:
1
Click on the keys beside Services , Telephony Services , System DNs , and Inactive DNs .
2 Click on the key beside the heading that indicates the type of telephone you are installing.
For example, click on the key beside
Set DNs to program digital telephones or IP telephones.
3 Click the telephone record ( DN XXX ).
4
Click General .
Caution: Caller ID set (DNXXX, Line Access, Line Assignment, Line XXX).
You can only enable Caller ID Set (target line s and analog devices attached to an GASM)
on a maximum of 30 telephones. If you attempt to copy an enabled setting to more than 30
sets, you will receive an error message.
*
*
ISDN/DECT, and Companion records
have a DN Type field instead of a Model field
and they do not have a Device Port field.
*