Nortel BCM 3.7, Manual

Page: 93 / 1004

System configuration process maps 93
Programming Operations Guide
Initial system configuration
Figure 13 Process for initial system configuration
System
hardware is
installed
Run
startup
Wizard
Refer to the Installation and Maintenance Guides for hardware setup.
Set up your system for correct network connection and basic telephony and
CallPilot properties. Refer to
“Using the Quick Start Wizard” on page 108 .
Set and
install
modules
Refer to the Installation and Maintenance Guides for media bay module
settings and connections. To identify the media bay modules to the system
and set up their line values, refer to
“Configuring resources — media bay
modules” on page 135 .
Set up
security
levels
There are a number of points at which you can enhance the security of
access to your system:
You can install a site-specific security certificate (
“Understanding BCM SSL
certificate properties” on page 68 ).
Set up
user
access
To maintain user access security, you can define different levels of
password security and user access. At a minimum, change the default
administration default passwords (ee_admin and supervisor). Refer to
“Managing system and user security access levels” on page 117 .
You can determine the encryption level required between the system and
clients (
“Setting system security compatibility levels” on page 119 ).