Nortel BCM 3.7, Manual

Page: 325 / 1004

Programming access codes 325
Programming Operations Guide
3
Use the following table to determine the settings you want to define direct dial sets.
Table 57 Direct dial values
Attribute Values Description
Type Internal
External
None This is the type of number for the direct-dial set.
Internal/External# DN
<external dial string> The DN number of the telephone to be designated as the direct dial
set. (Internal sets).
The actual phone number of the direct dial set (External sets).
Facility Line
Pool (A-O)
Use prime line
Use routing table The facility to be used to route the call to a direct dial set that you
define with an external number.
Note: If you choose Use prime line , ensure that prime line is not
assigned to the intercom button s for your telephones. When prime
line is assigned as an intercom button, it chooses the first available
line pool assigned to the telephone to make a call. If this line pool
does not have the correct lines for routing the call, the direct dial
call will fail. Refer to
“Assigning line access” on page 406 .
!
Security note:
The Business Communications Manager cannot verify that the number
you assign as an external direct dial set is valid. Check the number before assigning it as a
direct dial set by calling the direct dial you have assigned.