Nortel BCM 3.7, Manual

Page: 274 / 1004

274 Assigning Restrictions
N0008589 3.3
Note: When a remote user places an external call on a line, any filters used with the line still apply.
However, if DND is active on the line, no set or set/line restrictions apply.
Setting remote restrictions
Specify the restriction filter for the line that remote callers use to call in to Business
Communications Manager.
1 From the Lines headings, choose the line you want to set restrictions for.
2
Click on the key beside Remote restrictions .
3 Click the schedule heading that you want to configure. For example, Night .
The Remote restriction window for that schedule appears.
Figure 59 Enter remote restriction filters for a line
4 In the Use filter box, type in the number of the restriction filter you want to assign as the
remote restriction for this schedule.
5 Select the remote restrictions for each schedule. The default restrictions are shown in the
following table.
Note: The remote restriction restricts the numbers a user can dial on an incoming auto-answer line.
If a remote user then selects a line to place an external call, any filter used with the line still
applies.
Table 44 Default remote restrictions
Schedule Restriction filter Schedule Restriction filter
Normal 04
Schedule 1 (Night) 31 Schedule 4 00
Schedule 2 (Evening) 32 Schedule 5 00
Schedule 3 (Lunch) 33 Schedule 6 00