Nortel BCM 3.7, Manual

Page: 777 / 1004

IPSec 777
Programming Operations Guide
Adding Local Accessible Networks to the Branch Office IPSec tunnel
The maximum number of Local Accessible Networks you can add is 16.
1 On the navigation tree, click the Services key and click the VPN key.
2 Click the IPSec key and click the Branch Office Accounts key.
3 Click the tunnel you want to modify.
The Tunnel Parameters screen appears.
4 Click the Local Accessible Networks tab.
The Local Accessible Networks screen appears.
5 On the Configuration menu, click Add Local Accessible Network .
6 Configure the Local Accessible Network parameters according to the following table.
7 Click the Save button.
Adding Remote Accessible Networks to the Branch Office IPSec tunnel
The maximum number of Remote Accessible Networks you can add is 16.
1 On the navigation tree, click the Services key and click the VPN key.
2
Click the IPSec key and click the Branch Office Accounts key.
3 Click the tunnel you want to modify.
The Tunnel Parameters screen appears.
4 Click the Remote Accessible Networks tab.
The Remote Accessible Networks screen appears.
5 On the Configuration menu, click Add Remote Accessible Network .
Table 235 IPSec Local Accessible Network parameters
Attribute Description
Network Number
(L#) Allows you to specify the Network identifier.
The Network Number uniquely identifies a Local Accessible Network. The value for this setting
must follow certain conventions. You must type the prefix 'L' followed by a unique number
identifying the Local Accessible Network. For example, 'L2' is a valid name. If you specify an
existing Network number, you receive an error message. If you use non-sequential numbers
the system automatically reassigns sequential numbers. The Network identifier does not have
any significance, other than uniquely identifying an entry.
The maximum number Local Accessible Networks you can add is 16.
IP Address Allows you to specify the IP addresses of interfaces on Business Communications Manager
that can connect to this tunnel.
Enter the IP address in the dotted format.
IP Address Mask Allows you to specify the subnet mask of interfaces on Business Communications Manager
that can connect to this tunnel.
Enter the Subnet Mask in the dotted format.