Nortel BCM 3.7, Manual

Page: 445 / 1004

Configuring user speed dialing 445
Programming Operations Guide
Entering user speed dials at the telephone
Users can add, change, or assign a memory button for user speed dials during button programming
or at the telephone.
Press FEATURE *4 to add or change speed dials.
Press FEATURE *3 to add a speed dial to a memory button.
Refer to the Telephony Features Handbook for information about telephone operations for speed
dials.
Table 89 User speed dial settings
Setting Values Description
External # <external phone number> Enter the number the telephone will automatically dial when the user
speed dial code is entered.
Remember to include the access codes for the route you choose.
Facility Use prime line
Use line
Pool
Use routing table
Select the route you want the dialed number to take out of your system.
Note: Any line numbers or line pool codes that you specify must be
assigned to the telephone where the code is entered.
If you choose prime line, a prime line must be assigned to the telephone
where the code is entered.
Refer to “Configuring line access” on page 405 .