Nortel BCM 3.7, Manual

Page: 139 / 1004

Explaining the Media Bay Modules headings 139
Programming Operations Guide
5 Your next steps depend on which type of module you are configuring:
• If you are configuring a station or analog station module, ensure that the bus type is correct
and the Programmed Bus Type field displays the correct module type. The State field
displays Enabled , indicating that the module is active and ready to have telephones
connected. Refer to “Module types and capacities” on page 140 .
• If you are configuring trunk modules, you must now ensure each module associated with the
DS30 bus is set up. This process is described in the next section, “Defining trunk module
types and settings” on page 142 .
Trunk module, Analog Station Module or Data Module
Number of busy ports <digit> This setting indicates how many ports on the module are
currently being used.
State Enabled
Disabled
This setting indicates the current state of the module.
Use the Configuration menu item to change this setting.
Table 10 Bus XX record settings (Continued)
Heading Value Description