Nortel BCM 3.7, Manual

Page: 827 / 1004

Configuring IP Firewall Filters for an interface
827
Programming Operations Guide
Adding an Output Filter for a Firewall Filter Interface
Before you can specify a rule order, you must add filters.
The maximum number of output filter rules you can add is 32.
1 Click the Output Filter Rules’ Setting tab.
The Output Filter Rules’ Settings screen appears.
2 On the Configuration menu, click Add Output Filter Rule .
3 Configure the Output Filter Rule settings. These setting are described in the table in “Adding
an Input Filter for a Firewall Filter Interface” on page 823 .
4 Click the Save button.
Modifying an Output Filter for a Firewall Filter Interface
1 Click the Output Filter Rules’ Setting tab.
The Output Filter Rules’ Settings screen appears.
2
Click the Output Filter you want to modify.
3 On the Configuration menu, click Modify Output Filter Rule .
4 Modify the Output Filter attributes.
5 Click the Save button.
Deleting an Output Filter for a Firewall Filter Interface
1 Click the Output Filter Rules’ Setting tab.
The Output Filter Rules’ Settings screen appears.
2 Click the Output Filter you want to delete.
3 On the Configuration menu, click Delete Output Filter Rule .
A message appears that asks you to confirm the deletion.
4
Click the Yes button.