Nortel BCM 3.7, Manual

Page: 105 / 1004

Accessing the Wizards 105
Programming Operations Guide
What you need to know before you use the wizard
Use the following table to enter information that you want to enter into the wizard.
Warning:
Wizard timeouts
When the
Wizard Instance Timeout
message appears, it indicates that the wizard
was inactive for 30 minutes, the wizard has already been applied, or the Business
Communications Manager or the server-side wizard component was restarted.
Warning: Operations during Wizard application
Do not use Windows NT login sessions while you are using the wizards or while there are
wizards being applied.
Screen 1, General information
• What do you want to call your Business Communications Manager? (System Name)
• What region do you want to use for the Business Communications
Manager CallPilot system?
Refer to “CallPilot regions” on page 847 for a description of the
available choices. If you do not specify a region, the system defaults
to North America.
(CallPilot Region)
• What time zone is your system in? (Time Zone)
Screen 2, Data information
(which fields appear will depend on your current data hardware configuration)
• LAN settings
IP address LAN 1:
LAN 2:
Subnet mask LAN 1:
LAN 2:
Primary Wins Address LAN 1:
LAN 2:
Secondary Wins Address LAN 1:
LAN 2:
• WAN settings
IP address WAN 1:
WAN 2:
Subnet mask WAN 1:
WAN 2:
Port (read-only) WAN 1: T1
WAN 2: V.35