Nortel BCM 3.7, Manual

Page: 275 / 1004

Setting line telco features 275
Programming Operations Guide
Setting line telco features
If you subscribe to a voice message service outside your office, you can access it through your
Business Communications Manager system. You can specify what voice message center you use
for each external line that receives message waiting indication.
1
Click on the keys beside Services , Telephony Services , Lines .
2 Click on the Line record.
3
Click the Telco features heading.
The Telco features window for the line appears.
Figure 60 Choosing a remote voice message center
4
Select the Voice message center for the line, Center 1 - Center 5 or None .
Note: To program the external numbers for each Center, refer to “Configuring centralized
voice mail” on page 563 . If you have an MCDN private network set up, where the voice
message center is on a voice message device attached to the Meridian, this feature would have
to be set in all systems to point to that system, except for the telephones directly attached to the
Meridian system.