Nortel BCM 3.7, Manual

Page: 533 / 1004

Understanding MCDN network features 533
Programming Operations Guide
Figure 184 Network call redirection path
If you are using the centralized voice message system from a Meridian 1 system, you require the
following programming on the M1:
M1 programming in LD 17
• NASA set to Yes
• NCRD set to Yes
Verifying NASA is Active
• Overlay 22, LD 22
• REQ: PRT
• TYPE: ADAN DCH (slot number)
• NASA should be set to yes
If NASA is not on: Disable the D channel
• Overlay 96, LD 96
• REQ: CHG
• TYPE:DISDCH
Disable the loop
• Overlay 60, LD 60
• REQ: CHG
• TYPE: DISL (slot
number)
Program the D channel
• Overlay 17, LD 17
• REQ: CHG
• TYPE: ADAN
• ADAN: CHG DCH (slot
number)
• Keep pressing enter until
you get to NASA
• TYPE: yes
• TYPE: end
Verifying NCRD
• Overlay 20, LD 20
• REQ: PRT
• TYPE: TIE
• CUST: 0
• Route: Enter the route defined in LD 20
• Keep pressing enter until all values are
displayed. Check if NCRD is yes.
If NCRD is set to no
• Overlay 16, LD 16
• REQ: CHG
• TYPE: RDB
• CUST: 0
• ROUT: (route number) from LD 20
• Keep pressing enter until you get NCRD and type Yes
• Keep pressing enter until you get the REQ prompt
again
• TYPE: end
Business Communications Manager
Meridian 1
with Meridian Mail
SL-1 MCDN
Telephone A
Telephone B
Call forwarded to Meridian Mail
Original call