Nortel BCM 3.7, Manual

Page: 576 / 1004

576 Configuring MWI on DPNSS 1 networks
N0008589 3.3
Setting Message Waiting Indication
Follow these steps to set the MWI:
1 Ensure that you have programmed a telephone to access target lines for receiving messages.
For information on access to target lines, refer to
“Assigning message centers to a line” on
page 573 .
2
Click on the keys beside Services , Telephony Services , System DNs , and Active Set DNs.
3 Click a DN (DN 221-528).
4
Click on the key beside Line access and Line assignment.
5 Select the target line you specified in Selecting a message center .
Figure 197 Setting Target line voice mail settings for the telephone
6
Click Y to enable Vmsg set.
When Vmsg is enabled for a target line on a telephone, the telephone logs Message Waiting
Indication/Cancellation received for the corresponding target lines to the user.