Nortel BCM 3.7, Manual

Page: 181 / 1004

Universal T1 WAN (UTWAN) 181
Programming Operations Guide
Deleting a PVC Configuration record
Follow these steps to delete a PVC Configuration record.
1 On the navigation tree, click the Resources key and click the UTWAN Key.
2 Click the UTWAN1 heading.
The Summary screen appears.
3 Click the PVC Configuration tab.
The PVC Configuration screen appears.
4 Click the entry you want to delete in the PVC Configuration table.
5 On the Configuration menu, click Delete PVC Configuration .
A message prompts you to confirm the deletion.
6 Click the Yes button.
Configuring the UTWAN to use a PPP link
Configuring the UTWAN to use a PPP link consists of the following:
• “Configuring the PPP Parameters” on page 181
• “Configuring the LCP Options” on page 183
• “Configuring the IPCP Options” on page 184
• “Configuring the PPP User List” on page 185
Configuring the PPP Parameters
1
On the navigation tree, click the Resources key and click the UTWAN key.
2 Click the UTWAN1 heading.
The Summary screen appears.
3 Click the PPP Parameters tab.
The PPP Parameters screen appears.
4 Configure the PPP Parameters settings according to the information in the following table.
Table 24 PPP Parameters
Attribute Description
Compression
Status Select RTP Header to enable RTP Header compression on this PPP link.
Select Data to enable data compression on this PPP link.
Select None to disable compression.
Fragmentation
Status Select Enabled to enable fragmentation on this link.
Select Disabled to disabled fragmentation on this link.
The setting you choose for Fragmentation Status must be the same as the setting on the other
end of the PPP link.
The default setting is Disabled .