Nortel BCM 3.7, Manual

Page: 884 / 1004

884 Configuring an analog device DN record
N0008589 3.3
Assigning an external Hotline
The external Hotline feature provides automatic access to an line when an analog device
goes off-hook.
1
Click on the Hotline heading in the DN record.
2 Scroll down the Hotline type list and select External .
Figure 228 External Hotline screen example
Paging Y or N This setting is for analog telephones.
Defines whether paging announcements can be make from the analog telephone.
Set this value to N for modems and fax machines .
Direct dial Set 1 to Set 5
None
This setting is for analog telephones.
Assigns a designated direct dial telephone for the analog telephone.
This allows the analog telephone user to dial a single digit access code when
calling the direct dial telephone.
If the analog telephone is set up to receive MWI, the user can receive and reply to
messages sent from the direct dial telephone.
Refer to “Msg Indicate” on page 886 for more information on how to enable MWI
for an analog telephone.
For more information on direct dial telephones, refer to the Business
Communications Manager Programming Operations Guide .
Receive short
tones N or Y Set this value to Y for analog devices
Note:
For a detailed explanation on all capabilities fields, refer to the Business
Communications Manager Programming Operations Guide .
Table 288 Capabilities fields (Continued)
Attribute Values Description