Nortel BCM 3.7, Manual

Page: 122 / 1004

122 Managing access passwords
N0008589 3.3
Viewing the User Manager tabs
The various tabs under User Manager allow you to define user and group profiles and the
parameters that define security levels for user accounts. This heading is located under the
Management heading on the navigation tree.
• The User Profile tab appears showing the current user profile information.
Business Communications Manager comes with these default administrator user profiles:
— ee_admin (cannot be deleted) : Default password:
PlsChgMe!
. Access privilege:
Read-Write, dial-up access
— supervisor : Default password:
PlsChgMe!
. Access privilege: Read-Write, dial-up
access
• ISDN note: When you enter an ISDN dial up user interface, the user name shows up on
this list. If you plan to use the secure callback properties for an ISDN user, you need to
specify a static IP address for that interface. Refer to
“Configuring an ISDN interface” on
page 696 .
• The User Group List tab shows all the user groups defined in your system.
The system comes with a set of default User Groups that have various access privileges.
!
Security note: Change the default passwords on the ee_admin and supervisor
account after you initialize your system. The ee_admin account cannot be deleted, but
the group membership can be modified for both accounts.
Remote support: In order for the Nortel Networks support organization to assist
you, dial-in access has been granted to both default administrator accounts. If dial-in
access is removed, then remote access by support organizations may be impacted. It is
recommended that the administrator accounts and dial-in access rights be restricted to
select personnel. Callback capability increases the dial-in security.