Nortel BCM 3.7, Manual

Page: 49 / 1004

Text conventions 49
Programming Operations Guide
Text conventions
This guide uses the following text conventions:
About the buttons on your telephones
This guide uses text designators to indicate key pad feature buttons, such as Feature, Hold and
Release. The digital phones (7000, 7100, 7208, 7316, 7316E, 7208, and the Digital Mobility) all
use icons to label these buttons. The IP telephones display a tag over the far left display key. Table
1 shows the icons that appear for each function on the different types of Nortel Networks digital
telephones. Note that the 7316 and 7208 have a separate button for mute functions. The IP
telephones and the 7316E have separate buttons for both mute and handsfree.
!
Security Note:
This symbol indicates a point of system security where a default should
be changed, or where the administrator needs to make a decision about the level of
security required for the system.
angle brackets (< >) Indicates that you choose the text to enter based on the description
inside the brackets. Do not type the brackets when entering the
command.
Example: If the command syntax is:
ping <ip_address>
you enter:
ping 192.32.10.12
bold Courier text
Indicates command names and options and text that you need to enter.
Example: Use the
dinfo
command.
Example: Enter
show ip { alerts | routes }
.
italic text Indicates book titles
plain Courier
text
Indicates command syntax and system output, for example, prompts
and system messages.
Example:
Set Trap Monitor Filters
FEATURE
HOLD
RELEASE Indicates that you press the button with the coordinating icon on
whichever set you are using. (Refer to
About the buttons on your
telephones .)
Table 1 Telephone buttons
Button Name Digital phones: 7XXX and IP telephones: 20XX Legacy telephones
Feature
1
, Feature
(20XX) ,
Handsfree
2
(2004, 2002); (7316E)
7208/7316 use assigned memory button.
Mute 3
(20XX), (7208, 7316, 7316E)
Hold 4 ,
,
,