Nortel BCM 3.7, Manual

Page: 880 / 1004

880 Configuring an analog device DN record
N0008589 3.3
Line access
Line access settings allows you to assign lines or line pools to an analog device. After
lines and line pools are assigned, you can choose a prime line for the analog device. The
prime line is the line that is automatically selected when a call is made from an analog
device.
Figure 224 Line access screen example
Read these notes for more information about assigning lines and line pools.
• You can assign any number of lines to an analog device. Only two lines can be answered at
any one time on an analog telephone and one line at a time on a fax machine.
• You can assign any number of line pools to an analog device. If all lines in the pool are taken,
the user receives a busy signal.
To assign lines
1
Click on the key beside the Line access heading in the DN record.
2 Click on the Line assignment heading.
3
Click the Add button.
4 Type a line number in the Line box.
5
Click the Save button.
6 On the navigation tree, click the Line nnn you just created.
7
Use the following table to define the line for the analog device.
Device port <port number> This read-only setting shows the port number for the DN.
Table 286 Line assignment fields
Attribute Values Description
Appearance
type Ring only,
Appear & Ring,
Appear only Analog devices default to Ring Only .
Table 285 General record fields (Continued)
Attribute Values Description