Nortel BCM 3.7, Manual, Page: 249 / 1004

Assigning Trunk/line data 249
Programming Operations Guide
• “BRI fields” on page 262
• “DPNSS fields” on page 264
• “VoIP fields” on page 265
• “Lines field cross-reference chart” on page 267
Loop start analog/digital fields
Table 32 Loop start analog and digital fields
Attribute Value Description
Line type Public
Private to:
Pool A to O
Define how the line is used in relation to other lines in the system.
• Public line: can be accessed by more than one telephone.
• Private line: can be assigned only to one telephone and the prime telephone for
that line. Enter the internal number of the telephone.
• Pool A - O: assigns the line to one of the line pools. If a line is assigned to a line
pool, but is not assigned to any telephone, that line is available only for outgoing
calls.
For more information and tips, refer to “Line pool tips” on page 271 .
Dial mode Pulse
Tone
Specify whether the system uses dual tone multifrequency (DTMF) or pulse
signaling on the trunk.
Unsupervised line
Supervised line