Nortel BCM 3.7, Manual

Page: 109 / 1004

Accessing the Wizards 109
Programming Operations Guide
The General page for the Quick Start wizard appears.
2 Enter your system information on the General page, Network page, Telephony page and
CallPilot page.
Refer to the information you entered in the table under “What you need to know before you
use the wizard” on page 105 .
Refer to “Navigating the wizards” on page 77 if you do not understand how to move from
page to page.
3 When you reach the Summary page, review all the information you entered.
If required, go back and make changes, then return to the Summary page.
4 On the Summary page, click the Apply button.
A warning dialog box appears, indicating the system changes that will occur if you continue.
Figure 20 Quick Start Wizard application warnings
5
Press OK to continue, or Cancel to exit the Wizard.
If you press OK , a login dialog appears.
6
Enter an administration-level user name and password in the login box.
7 Click OK .
The wizard starts the initialization process and displays a progress screen. This screen does not
automatically update. Click the
refresh this page link after 20 minutes to check that the Status
line indicates that the change is Complete.
8 Click the close this window link to exit the wizard.