Nortel BCM 3.7, Manual

Page: 233 / 1004

Special telephones 233
Programming Operations Guide
• Direct dial telephone: This is the telephone that system users can dial with one digit (direct
dial access code). An example of this would be a receptionist telephone. This telephone is also
usually the control telephone for system scheduling. You can create up to five direct dial
telephones, however, they all respond to the same direct dial access code.
Auxiliary devices
A music source or an auxiliary ringer can be connected to the system hardware. In programming,
you need to define how these features will be accessed and used.
• Background music: If there is an external music source connected to your system or if you
have the IP music feature set up to use internet-based music distributors or download music
clips onto your system, you can listen to music through the speaker on the telephone
(
FEATURE 86 ), or you can allow the music to be heard by callers who have been put on hold.
• Auxiliary ringer: This optional device can be connected through a RJXX connection to your
system. The auxiliary ringer is best suited to factory type locations that require loud ringing
bells or horns.
• WLAN IP telephones: This handset communicates with the BCM through an IP connection
over the LAN or the WAN. An SVP server acts as the call processor between the handsets and
the Business Communications Manager IP processor. These handsets emulate the functionality
of the 2004 IP telephone.
Programming :
• “Programming access codes” on page 321
• “Creating Direct Dial sets” on page 324
• “Configuring the Capabilities features” on page 418
• “Defining ringing service schedules” on page 497 (extra dial telephone)
Programming :
• “Programming Feature settings” on page 465 (Background music and On hold)
• “Configuring the music source” on page 605 (IP music)
Programming :
• “Assigning Trunk/line data” on page 248 to turn the feature on/off for a line
• “Configuring the Capabilities features” on page 418 to turn the feature on for
specific telephones
• “Assigning ringing groups to lines” on page 498 , for the ring group settings
Programming : IP telephony key codes
DN record.
System setup and handset registration is contained in separate documentation.