Nortel BCM 3.7, Manual, Page: 193 / 1004

Configuring a data module 193
Programming Operations Guide
Line pool access
You can give the BayStack data module access to a line pool for outgoing data transmission.
Adding line pool access
1
On the navigation tree, click the Resources key and click the Media Bay Modules key.
2 Click the Bus 08 key and click the Data Module key.
3
Click the Line pool access heading
4 Click the Add button.
Or, right click the Line pool access heading and click Add .
The Add Line pool access screen appears.
5
In Pool box, enter the letter of the line pool to provide access to the BayStack data module.
You must program line pool access when you select the switched access settings for the
BayStack data module. To use PRI line pools, program the BayStack data module to use a
destination code .
6
Click the Save button.
Deleting line pool access
1 On the navigation tree, click the Resources key and click the Media Bay Modules key.
2 Click the Bus 08 key and click the Data Module key.
3
Click the Line pool access key and click the heading for the line pool you want to delete.
4 Click the Delete button.
Or, right click the heading for the line pool you want to delete and click Delete .
A confirmation dialog box appears.
5 Click the Yes button.