Nortel BCM 3.7, Manual

Page: 127 / 1004

Managing access passwords 127
Programming Operations Guide
Setting up callback for a user
If the user will be accessing the system through a dial-up connection, you need to add that group to
the user account. As well, in this case, callback will be enabled to ensure that the system security is
maintained.
1
Select Management, User Manager .
The User Profile screen appears showing the current user profile information.
2
Access the User Profile screen:
• If you are adding a new user: from the Configuration menu, select Add User .
• If you are editing an existing user: select the user name on the list, then from the
Configuration menu, select Modify User .
3
Enter a User Name , if one does not already exist.
4 Enter and confirm a password, if one has not already been specified.
5
Click to highlight the DialUpUserGroup name. Then, hold the <Ctrl> key down and click on
any other groups to which you want to assign the user.
6
Select Enabled from the Callback menu.
7 Enter the number the system will dial to contact the client modem. Ensure you include the
correct routing codes.
8 Click OK at the bottom of the screen to save the settings.
Figure 28 User profile for dial-up user