Nortel BCM 3.7, Manual

Page: 284 / 1004

284 Configuring D-packet service for T loops
N0008589 3.3
Configuring D-packet service for T loops
This configuration occurs for all profiles.
A T-loop can be used in combination with an S-loop to provide D-packet service for a
point-of-sale terminal adapter (POSTA) or other D-packet device. To deliver D-packet service, a
network connection (T-loop) is programmed to work with a terminal connection (S-loop). The
loops must be on the same physical module. This service is disabled by default.
1
Under the T-loop you want to configure, click on D-packet service .
2 Beside D-packet enabled , choose N (disabled) or Y (enabled).
3
If you enable D-packet service, beside Associated loop , enter the S-loop you want to
associate.
Figure 69 Enable/disable D-packet service, and associate a loop
4
At the top of the navigation tree, click on the Add button.
5 In the Add D-packet dialog , enter a service number.
Figure 70 Add a D-packet service
6 Click on TEI .
7
At the top of the navigation tree, click on the Add button.
8 In the Add TEI dialog, enter the TEI number supplied by your service provider.