Nortel BCM 3.7, Manual

Page: 468 / 1004

468 Programming Feature settings
N0008589 3.3
Background and on-hold music sourcing
If there is an music source connected to your system, you can listen to music through the speaker
on the telephone (
FEATURE 86 ), and/or you can allow the music to be heard by callers with calls
on hold.
External source: The Business Communications Manager allows you to attach an external music
source to the hardware. Refer to the hardware installation guides for details about connecting the
source.
IP music: On systems running BCM version 3.5 or newer software, you can use the IP music
feature to configure a list of .wav or .au files to use as background music and music on hold. Refer
to
Chapter 25, “Configuring the music source,” on page 605 .
Clid Match Length None, <3-8> Set this number to the number of digits that you want an
incoming number and a system speed dial number to match
before displaying a name on the telephone receiving the call.
If you choose None , the feature is disabled.
Note: Number matching starts from the end of the dial string.
Refer to “Using alpha tagging for name display” on page 463 .
Maximum CLI per Line 30 (read-only) This setting indicates the maximum number of telephones that
will display CLID simultaneously for an incoming call.
Maximum System Speed
Dials 70 or 255 Determine how many system speed dials you want to be able
to assign.
If you plan to use an extensive alpha tagging list, choose the
255 setting.
Refer to “Using alpha tagging for name display” on page 463
and “Configuring system speed dial numbers” on page 482 .
Warning:
According to U.S. copyright law, a license can be required from the American
Society of Composers, Authors and Publishers or a similar organization if radio or TV
broadcasts are transmitted through the Background Music feature of this
telecommunication system.
Nortel Networks hereby disclaims any liability occurring as a result of failure to obtain a
license.
Table 96 Set feature values (Continued)
Attribute Value Description