Nortel BCM 3.7, Manual

Page: 107 / 1004

Accessing the Wizards 107
Programming Operations Guide
• What is the received number length for calls from the Private
network? (Private length)
• What is the received number length for the network?
The default is equal to the number of digits entered in the Start DN
length field.
(Public length (max))
Ignore the following questions if you do not have IP telephones on your system.
• Are you planning to deploy a large number of IP telephones?
The field beside 3/5 DS30 Split to increase IP telephony capacity
determines how many voice channels the Business Communications
Manager provides.
If you need more information to help you decide, click the help link.
You can also refer to Chapter 26, “Configuring the MSC resources,”
on page 613 .
No = 2/6 split (default)
Yes = 3/5 split
• Do you want to be able to immediately start registering Nortel IP
terminals on the system? (Registration)
On
Off
• Do you want to change the default IP telephone access password?
This is the password that installers will need to enter before they can
configure an IP telephone in the field.
(Password)
• Do you want the system to automatically assign extension numbers
(DNs) to your IP telephones when you install them? (Auto Assign DNs)
On
Off
Screen 4, CallPilot Initialization (complete this section if you intend to use CallPilot on your system.
• Do you want to initialize CallPilot on your system? (Call Pilot System
Initialization)
Yes No
• Do you want to create a new System Administrator password?
(Default: 0000)
(System Administrator
Password)
• If you create a new password, retype it in this field. (System Administrator
Password Confirmation)
• Do you want to specify an Attendant DN length?
This DN must be the same length as the DN length you specified on
the Telephony page.
Attendant DN
• Which system are you going to use for your primary interface? (Primary UI Style)
NVM
CallPilot
• In which language do you want your system prompts to appear?
The wizard will enter a choice, based on your selection of the
CallPilot Region on the General Page. You can change that default
choice here.
(Primary Language)