Nortel BCM 3.7, Manual

Page: 815 / 1004

Implementing Common Open Policy Services (COPS) 815
Programming Operations Guide
Modifying the COPS Client Server Retry Data
If Business Communications Manager cannot connect to the COPS Client Server on its first
attempt, Business Communications Manager will wait and then try to connect again. On the COPS
Client Server Retry Data screen, you can enter the number of times that Business Communications
Manager attempts to connect again and time it waits between attempts.
1 On the navigation tree, click the Services key and click the Policy Management key.
2 Click the COPS Client key and the Configuration heading.
The COPS Client Server screen appears.
3 Click the COPS Client Server Retry Data tab.
The COPS Client Server Retry Data screen appears.
4 Configure the COPS Client Server Retry Data according to the following table.
5 Press the Tab key to save your changes.
Table 253 COPS Client Retry data
Attribute Description
Server Retry Count Enter the number of times that Business Communications Manager attempts to connect to the
COPS Server if the original connection attempt fails.
You can enter a value from 0 to 9999 attempts.
Server Retry Interval Enter the amount of time that Business Communications Manager waits before attempting to
connect to the COPS Client Server again.
You can enter a value of 0 to 65535 centiseconds.
Note: 100 centiseconds equals one second.