Nortel BCM 3.7, Manual

Page: 108 / 1004

108 Accessing the Wizards
N0008589 3.3
Using the Quick Start Wizard
Use the Quick Start Wizard to set the basic capabilities of your system, such as the name of your
system, the CallPilot profile, basic data setup, and the telephony region and template.
Do not use this wizard until you have read and complied with the warnings printed in
“Wizard Warnings” on page 104 .
You can access a Quick Start Wizard from either a serial port connection or a LAN connection.
The appearance will be slightly different, but the information required is the same. If you have not
already connected your computer to the Business Communications Manager base unit, refer to the
Installation and Maintenance Guide for details. To use the Unified Manager wizard, refer to
“Entering information into the Quick Start Wizard” on page 108
To help you fill out the wizard, you can print out or copy the pages in “What you need to know
before you use the wizard” and collect all the information that you need before you run the wizard.
Entering information into the Quick Start Wizard
This section describes how to use the Quick Start Wizard to set up your system with information
that is unique to your system. Refer to
“What you need to know before you use the wizard” on
page 105 for a list of the fields contained in this wizard:
1
On the Wizards page, click the Quick Start icon.
• Do you want to initialize Auto-attendant? (Auto-attendant Initialize?)
Yes
No
• If you choose to initialize Auto-attendant, enter the line and ring
information.
First line in the range you want to assign to the Auto-attendant.
Last line in the range you want to assign to the Auto-attendant.
Number of rings before Auto-attendant answers.
from line:
to line:
number of rings:
Warning: Running the Quick Start Wizard
Run the Quick Start Wizard only to configure uninitialized systems. When you click the
Apply button, Business Communications Manager erases the telephony programming
and disables the telephony system temporarily. During application of the Wizard, the
Business Communications Manager base unit reboots several times.
!
Security note: Disable the Quick Start Wizard once it has run successfully. This can
be performed from the Programming Wizards page. On this page, click the Disable Quick
Start link. The Quick Start Wizard button icon disappears from the page.