Nortel BCM 3.7, Manual

Page: 437 / 1004

Default button assignments 437
Programming Operations Guide
7316 button defaults
Button mapping for the 7316 digital phone is unique. Although the button is patterned after the
7310, the 7316 does not have a second level on its upper button group. Because of this, the
numbering for the 7316 is not consecutive. Refer to the diagrams below.
Internal autodial numbers are assigned to buttons 11, 13, 15, 17, 19, and 21 on the main button
group. Programmed external line buttons descend down the lower left buttons, starting with button
01. When more than five external lines are programmed, assignment continues on the lower right
buttons, starting at button 06.
Important note: The 7316E digital phone buttons are mapped differently than the 7316.
Therefore, if you replace a 7316 telephone with a 7316E, the button programming will revert to the
default settings for the 7316E, losing any keys programmed by the user at the telephone. Also,
settings that are copied from one telephone to the other may be in a different location on the new
telephone. This is consistent with how the system behaves if you switch any telephone model for a
different model on the same connector.
The following figure shows the default button number assignments on the 7316 digital phone.
Figure 140 7316 telephone button assignment
7316 upper buttons (PBX and DID) default button settings
Btn # Btn #
Autodial to 227 23 31 Autodial to 231
Autodial to 228 25 33 Autodial to 232
Autodial to 229 27 24 Autodial to 239
Autodial to 230 29 26 Autodial to 240
7316 lower button defaults
Btn # PBX DID Btn # PBX DID
11 Autodial 221 17 Autodial to 224
13 Autodial 222 19 Autodial to 225
15 Autodial 223 21 Autodial to 226
01 DND Target Line 06 Conference
02 Transfer 07 Last No. Redial
03 Call Forward 08 Intercom
04 Pick-Up 09 Intercom
05 Page-General 10 Handsfree
11
13
15
01
02
03
04
05
17
19
21
06
07
08
09
10