Nortel BCM 3.7, Manual

Page: 304 / 1004

304 Defining remote access packages
N0008589 3.3
Defining remote access packages
The Remote access packages setting allows you to control the remote use of line pools.
Create a remote access package by defining the system line pools remote users can access. You
then assign the package to individual lines, (refer to
“Defining line pool access for remote
packages” ), and to a particular Class of Service password (see “Using COS passwords” on page
305 ).
Defining line pool access for remote packages
Perform the following procedure for each package you defined in the previous section:
1 Click on the key beside Line pool access .
2
Click the Add button.
The Add Pool Access dialog box appears.
3 In the Pool field, enter a line pool.
4
Click Save .
5 Repeat steps 1 to 4 for all packages you require line pool access codes for.
Defining remote Page for remote packages
To define Remote access packages, follow these steps:
1 Click the keys beside Services , Telephony Services , General settings , and Remote access
packages .
2 Click a Package number ( 00 to 15 ).
The Package window appears. Refer to Figure 85 .
3 Type in Y or N to enable/disable remote paging for each pool in the Remote access package.
4
Repeat steps 3 and 4 until you have defined all the package values you require.