Nortel BCM 3.7, Manual

Page: 606 / 1004

606 Selecting the music source
N0008589 3.3
Selecting the music source
After you have connected the music source, you must select the music source you want to use.
1 On the navigation tree, click the Services key and click the IP Music heading.
The Summary screen appears.
2 Configure the IP Music Summary parameters according to the following.
3 Press the Tab key to save your changes.
Table 141 IP Music Summary parameters
Setting Definition
Description Provides a description of the IP Music Service.
Version Shows the version number of the IP Music Service.
Music Source Allows you to select the music source you want to use.
Select Audio Jack if you are using an external music source that is connected to the MSC card
on the Business Communications Manager.
Select BcmAmp if you are using the IP Music feature to connect to the music source available on
the Business Communications Manager. If you select BcmAmp, you must then configure the
BcmAmp application before you can use it. For information about how to configure BcmAmp,
refer to
“Configuring BcmAmp” on page 607 .
Select Network Device if you are using the IP Music feature to connect to a music source on the
data network. If you select Network Device, you must configure the Network Device before you
can use it. For information about how to configure the Network Device, refer to
“Configuring a
Network Device to be the IP Music Source” on page 611 .
Note: If you choose Audio Jack as the Music Source, there is no more configuration
required for the Music Source.