00.41
34 00
[Integral ABS] Checking brake
pads/brake discs for wear/replacing
if necessary
(Inspections II and III)
34 00
[Integral ABS] Checking front
brake pads for wear
•
Wear indicators must be clearly visible.
•
If necessary, check/measure thickness of brake
pads.
e
Attention:
Brake pad thickness must not fall below the minimum
value.
Always replace the brake pads as a complete set.
Minimum pad thickness:
......... 1.0 mm (0.0394 in)
•
Check colour allocation of brake pads-brake ca-
lipers.
Colour code:
................................................. white
34 00
[Integral ABS] Checking rear
brake pads for wear
•
Remove the cover from the brake caliper.
•
Check the wear indicator (1) to assess brake pad
wear.
L
Note:
If the tip of the wear indicator is in contact with the
opposing brake pad, remove the brake pads and re-
place if necessary.
Minimum pad thickness
.......... 1.0 mm (0.0394 in)
34 00
[Integral ABS] Checking brake
discs for wear
•
Examine the brake disc carefully for cracks, da-
mage, distortion or score-marks.
•
Measure the brake disc with a micrometer.
Brake disc wear limit
Front brake discs ..................... 4.5 mm (0.1772 in)
Rear brake disc........................ 4.5 mm (0.1772 in)
K41000070
K41000030
1
K41340050
Summary of Contents for K 1200RS
