00.51
34 00
[Integral ABS] Replacing brake
fluid in the control circuit/bleeding
(Inspection IV) every 2 years
d
Warning:
All repair and maintenance work on the
BMW Integral ABS should be carried out by
specially trained personnel.
Maintenance and repair procedures and processes
should be strictly observed.
Use only new brake fluid from an unopened
container.
e
Attention:
Do not allow brake fluid to come into contact with
painted parts of the motorcycle, because brake fluid
destroys paint.
Protect parts on the handlebar fitting and pressure
modulator with cloths.
L
Note:
The Integral ABS brake system has four indepen-
dent brake fluid circuits.
The control circuit leads from the handbrake / foot-
brake cylinder to the pressure modulator.
The brake-fluid level is independent of brake pad
wear.
L
Note:
The wheel circuit must be filled with brake fluid.
34 00
[Integral ABS] Preliminary work -
front/rear control circuit
d
Warning:
When performing maintenance and repair work on
the BMW Integral ABS, avoid rapid and forceful
pumping of the brakes.
•
Place the motorcycle on its side stand and turn
the handlebars all the way to the left.
•
Repeatedly and slowly pull the front brake
lever lightly to expel air from brake master cylin-
der.
–
Place the motorcycle on its centre stand so that
it is level.
–
Remove the seat.
–
Remove the left/right rear side sections
(
a
46.15).
–
Remove the fasteners securing the coolant tank.
–
Turn the handlebars to the left.
e
Attention:
Do not disconnect the connector from the ABS con-
trol unit.
Summary of Contents for K 1200RS
