manualshive.com logo in svg

Beckman Coulter IMMAGE 800, Operation Manual

The Beckman Coulter IMMAGE 800 is a state-of-the-art clinical diagnostics system. Whether you're a technician or a healthcare professional, our detailed and comprehensive Operation Manual is essential for understanding its functionality. Visit manualshive.com to download the manual for free and optimize your proficiency with this remarkable product.

Share
Download
background image

IMMAGE 800 Operations Manual   A11403

Index

 

September 2016

Page iii of vii

Calibration report . . . . . . . . . . . . . . . . . . . . . . . . .  5-26
Control report . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-26
Patient report . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-26

Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-37
Display events dialog box . . . . . . . . . . . . . . . . . . .  10-46
Displaying a load list

Load list screen . . . . . . . . . . . . . . . . . . . . . . . . . .  7-74

Displaying calibrator lot parameters  . . . . . . . . . . . .  6-36

Calibrator lot display dialog box . . . . . . . . . . . . . .  6-37
Calibrator summary dialog box  . . . . . . . . . . . . . .  6-36

Displaying reagent parameters . . . . . . . . . . . . . . . . .  6-7

Reagent lot parameters dialog box  . . . . . . . . . . . .  6-8
Reagent summary dialog box  . . . . . . . . . . . . . . . .  6-7

Displaying/editing a sample program  . . . . . . . . . . .  7-15
Disposal of waste liquids . . . . . . . . . . . . . . . . . . . . . .  1-8
Drain requirements  . . . . . . . . . . . . . . . . . . . . . . . . .  2-47
Drug rate response curve  . . . . . . . . . . . . . . . . . . . . .  3-7
Dynamic blanking  . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-4

E

Editing a control. . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-12
Editing a sample comment  . . . . . . . . . . . . . . . . . . .  5-61
Editing panels

Clear chems. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-11

Editing programs before rerun

Clear chems. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-65
Rerun-edit samples screen  . . . . . . . . . . . . . . . . .  7-65
Reuse dil  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-65

Editing samples within a batch

Patient demographic  . . . . . . . . . . . . . . . . . . . . . .  7-49

Electronics compartment . . . . . . . . . . . . . . . . . . . . .  2-15
Electronics control compartment . . . . . . . . . . . . . . .  2-14
Emergency stop  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
Entering an off-line dilution factor  . . . . . . . . . . . . . .  7-33
Environmental conditions  . . . . . . . . . . . . . . . . . . . .  2-47
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-21
Error table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-21
Event log option(s)  . . . . . . . . . . . . . . . . . . . . . . . .  10-44
Event log options . . . . . . . . . . . . . . . . . . . . . . . . . .  10-45
Example of procedure table  . . . . . . . . . . . . . . . . . . .  1-4

F

Failed calibration . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-34
Fan filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-12
Fans  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-5
Fatal errors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-5
File number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-6
Floppy diskette  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-24
Floppy diskette drive . . . . . . . . . . . . . . . . . . . . . . . .  2-22
Fluid spills . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8, 10-9
Formatting the date

2 digits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-44
4 digits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-44
Date and time screen. . . . . . . . . . . . . . . . . . . . . .  5-45
Date/time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-44
Day format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-44
Day Month Year . . . . . . . . . . . . . . . . . . . . . . . . . .  5-44
Leading zero (01). . . . . . . . . . . . . . . . . . . . . . . . .  5-44
Month Day Year . . . . . . . . . . . . . . . . . . . . . . . . . .  5-44
Month format . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-44
No leading zero (1)  . . . . . . . . . . . . . . . . . . . . . . .  5-44
Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-44
Separator field . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-45

Year format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44
Year Month Day . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44

Formatting the time

12 hour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46
24 hour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46
Date/time  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46
Hour format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46
Leading zero (01) . . . . . . . . . . . . . . . . . . . . . . . . . 5-46
No leading zero (1) . . . . . . . . . . . . . . . . . . . . . . . . 5-46
Separator field  . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46
Time format  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46

Function button  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34
Function button description

Buffer/diluent  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Cal ldList. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Cal options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Cancel request . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Read cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Read reagent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Reagent summary  . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Request cal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

Function buttons. . . . . . . . . . . . . . . . . . . . . . .  2-28, 2-34
Functional area  . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-52

G

Graphical user interface . . . . . . . . . . . . . . . . .  2-26, 2-34

H

Haptoglobin (HPT) . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Heat block temperature sensor  . . . . . . . . . . . . . . . . . 2-9
High voltage-electric shock risk . . . . . . . . . . . . . . . . 1-11
Host communications. . . . . . . . . . . . . . . . . . . . . . . . 5-50

Auto send results . . . . . . . . . . . . . . . . . . . . . . . . . 5-52
Operational mode . . . . . . . . . . . . . . . . . . . . . . . . . 5-54
Port parameters . . . . . . . . . . . . . . . . . . . . . . . . . . 5-51
Sender ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-50
Timeout value . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-52

Host communications messages . . . . . . . . . . . . . . . 7-83

Bidirectional with host query. . . . . . . . . . . . . . . . . 7-83
Host down. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-83
Host down — Query in progress  . . . . . . . . . . . . . . 7-83
Host off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-83
Host up — Query in progress. . . . . . . . . . . . . . . . . 7-83
Host up, biodirectional  . . . . . . . . . . . . . . . . . . . . . 7-83
Host up, unidirectional  . . . . . . . . . . . . . . . . . . . . . 7-83

Host communications parameters screen  . . . . . . . . 5-50
Host programming of a control . . . . . . . . . . . . . . . . . 7-39
Host query . . . . . . . . . . . . . . . . . . . . . . . 2-45, 7-79, 7-80
Hydro pneumatics  . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

I

Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-28, 2-31
IMMAGE 800 Immunochemistry System . . . . . . . . . . 2-2
IMMAGE 800 Instrument . . . . . . . . . . . . . . . . . . . . . . 2-3
Immunoglobulin A (IGA). . . . . . . . . . . . . . . . . . . . . . . 3-8
Immunoglobulin G (serum IGG, urine IGU) . . . . . . . . 3-8
Immunoglobulin M (IGM) . . . . . . . . . . . . . . . . . . . . . . 3-8
Industry standards . . . . . . . . . . . . . . . . . . . . . . . . . . 2-53
Inhibition of immunoprecipitin by hapten (drug) . . . . . 3-6
Inserting a blank position for chemistry insertion . . . . 5-5
Insoluble complexes. . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Summary of Contents for IMMAGE 800

























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IMMAGE 800

ABB Endura AZ20 series Instruction preview
Endura AZ20 series
Brand: ABB Pages: 8
Hach PLATINUM Series Manual preview
PLATINUM Series
Brand: Hach Pages: 64
SAGEMCOM UM20 User Manual preview
UM20
Brand: SAGEMCOM Pages: 33
Varian CP-4900 Micro-GC Firmware Update Manual preview
CP-4900 Micro-GC
Brand: Varian Pages: 13
Dusty Strings Dusty Harp Pickup Series Installation Instructions preview
Dusty Harp Pickup Series
Brand: Dusty Strings Pages: 5
National Instruments 435 Series Where To Start preview
435 Series
Brand: National Instruments Pages: 12
Fluke Comark Diligence 600 Reference Manual preview
Comark Diligence 600
Brand: Fluke Pages: 61
Dynojet Dynoware RT Installation Manual preview
Dynoware RT
Brand: Dynojet Pages: 88
VP instruments VPLog-i-R User Manual preview
VPLog-i-R
Brand: VP instruments Pages: 15
Victron energy BMV-710H Manual preview
BMV-710H
Brand: Victron energy Pages: 46
Kawai CA901 Owner'S Manual preview
CA901
Brand: Kawai Pages: 110
StarLogixs LiveTester LT 220 Operation Manual preview
LiveTester LT 220
Brand: StarLogixs Pages: 7
HyQuest Solutions TB71 User Manual preview
TB71
Brand: HyQuest Solutions Pages: 25
jbc NA101 Instruction Manual preview
NA101
Brand: jbc Pages: 12
Sontex Superstatic 749 Instructions For Use Manual preview
Superstatic 749
Brand: Sontex Pages: 24
Grace Industries Grace-Watch User Information preview
Grace-Watch
Brand: Grace Industries Pages: 183
Zico ZI-9943 Operating Instruction preview
ZI-9943
Brand: Zico Pages: 3
Hach 9523sc User Manual preview
9523sc
Brand: Hach Pages: 252

Brands by name

Popular brands

Load more brands