QC Log
Accessing QC Logs
IMMAGE 800 Operations Manual A11403
Quality Control
September 2016
Page 9-23
9
Accessing QC Logs
Follow the steps below to access QC logs.
Step
Action
1
From the Quality Control screen, select the control desired.
Use the
<Page Up>
/
<Page Down>
buttons to access additional controls.
2
Select
QC Log [F5]
.
3
Enter a Start date and an End date in the date range fields. The default
Start/End date is the current date. Select
<OK>
to choose the default. Use
[Tab]
to toggle between fields.
Select
<OK>
to continue.
OR
Select
<Cancel>
to exit.
4
The QC Log may be displayed by Chemistry or by Reagent Lot. (The
default display is by chemistry in alphabetical order.)
To display the QC Log by Reagent Lot, select
Rgt Lot [F2]
. (Refer to
5
Enter the date range in the date range fields.
Select
<OK>
to continue. Data is displayed by chemistry with reagent lot
listed in descending order. (Use the
<Page Up>
/
<Page Down>
buttons to
access additional data.)
OR
Select
<Cancel>
to exit.
6
To print the QC Log select
Print [F10]
.