manualshive.com logo in svg

Beckman Coulter IMMAGE 800, Operation Manual, Page: 527 / 536

Share
Download
Beckman Coulter IMMAGE 800 Operation Manual Download Page 527

 

Multipage list

IMMAGE 800 Operations Manual   A11403

Glossary

 

September 2016

Page 5 of 6

 

Multipage list

A feature of the IMMAGE 800 interface that lists more than one screen page of 
information (e.g., chemistries).  The multipage list includes Page-Up and Page-Down 
keys for next-page scrolling.

Numeric character

0-9.

Offset

A value which is added or subtracted following the application of a slope value to a 
chemistry result.

On-board reagent

The chemistries, buffers, and diluents that are currently loaded onto the system.

Panel

A group of tests that are ordered together.

Parity

A method of detecting serial data transmission errors.

Patient demographics

Information that is associated with a patient, such as name, ID, age or sex.

Pause

An instrument command which allows results to be generated for all samples in 
progress and then returns the instrument to 

Standby

 status.

Peltier

A temperature control system that heats or cools depending on the ambient 
temperature.

Primary tube

A tube into which the patient sample is collected.

Range length, bar code

The limits of the code length which may be defined for a symbology.

Reagent name

The two to five-character abbreviation of the chemistry name.

Reference interval (normal range)

A user-defined range consisting of low and high values that are used to flag patient 
results as "low" or "high".

Summary of Contents for IMMAGE 800

























































































































































































































































































































































































































































































































































Reviews:

No comments