Displaying QC Summaries
Introduction
IMMAGE 800 Operations Manual A11403
Quality Control
September 2016
Page 9-27
9
Displaying QC Summaries
Introduction
The QC Summary report contains the cumulative mean, SD, CV and number of results
(N) for any control within a specified date interval. The printed report contains the
cumulative mean, SD, CV and Number of accumulated results.
A report can be printed in the Inter-Lab format for submission to Beckman Coulter.
The constituent code must be defined in order for a chemistry to be included in the
Inter-Lab QC Summary.
Accessing the QC Summary
Follow the steps below to access the QC Summary.
Additional information
Refer to CHAPTER 5,
System Setup
, Report Setup, Defining Inter-Lab Information for
information on setting up a Inter-Lab reference number and contact person for the
Inter-Lab QC Summary.
Step
Action
1
From the Quality Control screen, select the control desired.
Use the
<Page Up>
/
<Page Down>
buttons to access additional controls.
2
Select
QC Summary [F6]
from the Quality Control screen. (Refer to
3
Enter a Start date and an End date in the date range fields. The default
Start/End date is the current date. Select
<OK>
to choose the default. Use
[Tab]
to toggle between fields.
Select
<OK>
to continue.
OR
Select
<Cancel>
to exit.
4
Select
Print [F10]
to print the QC Summary.
OR
Select
Inter-Lab [F9]
to print a QC Summary report in the Inter-Lab
format.
