Report Setup
Defining the Patient Report Format
System Setup
IMMAGE 800 Operations Manual A11403
Page 5-26
September 2016
Defining the Patient Report Format
The instrument status must be in
Standby
in order to proceed with the steps below to
define the patient report format.
Disabling Automatic Printing
Patient, calibration and control reports automatically print unless the print is disabled.
The instrument status must be in
Standby
in order to proceed with the steps below to
disable automatic printing.
Step
Action
1
From the Setup screen, select
<5> Report Setup
2
Select the options button
<
▼
>
beside
Patient
under
Report Format
.
3
Select the number for the appropriate format. (Refer to APPENDIX B,
for format examples.)
•
Lab Report
•
Lab Report - Dilutions
•
Patient Chartable Reports
The default patient report format is Lab Report.
Step
Action
1
From the Setup screen, select
<5> Report Setup
2
Select the check box next to
Patient Report
Calibration Report
Control Report
to disable the automatic printing of patient, calibration, or control reports
respectively.
The default is all three reports are automatically printed (checked).
