manualshive.com logo in svg

Beckman Coulter IMMAGE 800, Operation Manual, Page: 384 / 536

Share
Download
Beckman Coulter IMMAGE 800 Operation Manual Download Page 384

Editing a Control

 

Introduction

Quality Control

IMMAGE 800 Operations Manual   A11403

 

Page 9-12

September 2016

Editing a Control

Introduction

The assigned mean, standard deviation (SD), constituent code and control ID of a 
previously defined control can be edited.  In addition, individual chemistries can be 
added or deleted.

Editing Precautions

When editing control information, the following should be considered:

• Changing the mean and/or SD may affect subsequent QC statistical data.

• Changing previously defined mean and/or SD to zero will set the mean to zero and 

the SD to 99999.

• Subsequent data points will be compared to the new mean and SD.

Accessing a Control to Edit

When the instrument status is 

Standby

, follow the steps below to access a previously 

defined control and to edit an assigned mean, SD, constituent code or control ID of a 
previously defined control.

Step

Action 

1

From the Quality Control screen select the button beside the control name 
to be edited.

Select 

Define/Edit [F2]

.  (Refer to Figure 9.3.)

(1 of 2)

Summary of Contents for IMMAGE 800

























































































































































































































































































































































































































































































































































Reviews:

No comments