Approving a Calibration
Plotting a Robust Means Data Curve
IMMAGE 800 Operations Manual A11403
System Setup
September 2016
Page 5-109
5
Plotting a Robust Means Data Curve
The Robust Means Data Curve plots a Robust Means/Time curve for reagent
development purposes. A Robust Means Data Curve may be plotted for UDR rate and
calibration runs only. When a Plot Robust Means Data is requested, the number of
actual replicates run by the instrument is displayed within the parentheses next to the
Replicates box. This will include accepted and rejected replicates. For further details,
refer to Programming Rate Mode and Calibrating a UDR Chemistry in this chapter.
Refer to the following steps to plot a Robust Means Data Curve.
Figure 5.54
User-Defined Reports Screen
Step
Action
1
Go to the User-Defined Chemistries screen and select a UDR chemistry.
(Refer to Figure 5.28.)
2
Select
Print Plot (F10)
. A User-Defined Reports screen appears. (Refer to
3
From the User Defined Reports screen, select option
<6> Plot Robust
Means Data Curve
and
<OK>
. The Plot Robust Means Data Curve
window appears as shown in Figure 5.55.
OR
Select
<Cancel>
to return to the User-Defined Chemistries screen.
4
From the Plot Robust Means Data Curve window, enter the rack number,
position number, and replicate number. Select
Plot
to plot the curve. A
typical Robust Means Data Curve is shown in Figure 5.56.
OR
Select
<Exit>
to return to the previous screen.
E011437S.EPS
