Beckman Coulter IMMAGE 800 Operation Manual Download Page 258

Page: 258 / 536

Cal Options

Definition of Slope and Offset

Reagents/Calibration

IMMAGE 800 Operations Manual A11403

Page 6-38

September 2016

Definition of Slope and Offset

Slope and offset values are entered to scale a result from the IMMAGE 800 to
correlate with other systems.

Acceptable slope entries: 0.001 - 9999.0
Acceptable offset entries: -9999.0 - +9999.0

The result is multiplied by the slope, then the offset is added or subtracted.

Entering Slope and Offset Adjustment

The instrument status must be in

Standby

in order to follow the steps below to enter

Slope and Offset Adjustment.

Restoring Default Slope and Offset Adjustments

The instrument status must be in

Standby

in order to follow the steps below to restore

the default slope and offset adjustments.

Select

<OK>

from the Delete Calibrator Lot Confirmation dialog box to

delete the parameters

<Cancel>

to return to the Calibrator Summary dialog box without deleting

parameters.

Step

Action

, continued

(2 of 2)

Step

Action

Select

Rgts/Cal

from the menu bar.

Select

Cal Options [F5]

Select

<2> Slope/Offset Adjustment

Select the

Slope

Offset

field beside the chemistry desired.

Type the slope and/or offset number in the

Slope

and

Offset

fields.

Select an icon from the menu bar to save the slope/offset number and go to
another screen.

Step

Action

From the Slope/Offset screen select

Restore Default [F1]

Select

<OK>

to restore all the defaults. (The default for each slope is

1.000 and each offset is 0.000.)

Select

<Cancel>

to return to the Slope/Offset screen without restoring the

default.

Summary of Contents for IMMAGE 800
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for IMMAGE 800

Reviews:

Related manuals for IMMAGE 800

Brands by name

Popular brands

Beckman Coulter IMMAGE 800, Operation Manual

Search results

Summary of Contents for IMMAGE 800

Reviews:

Related manuals for IMMAGE 800

Brands by name

Popular brands