Editing Sample Programs Before Rerunning
Editing Programs Before Rerun
IMMAGE 800 Operations Manual A11403
Sample Programming
September 2016
Page 7-65
7
Editing Programs Before Rerun
Follow the steps below to edit individual sample programs before rerunning.
Figure 7.20
Rerun-Edit Samples Screen
Step
Action
1
Select
Rerun Samples [F6]
from the Program Sample screen and select
samples to be rerun.
(Refer to Rerunning a Sample, Selecting Samples to be Rerun in this
Section for more information.)
2
Select
Edit Samples
.
3
Perform any of the following: (Refer to Figure 7.20.)
• Edit the desired sample program information. (Refer to Programming a
Sample in this chapter for more information.)
• Select
Reuse Dil [F4]
to reuse the original dilution. Select
<OK>
to
confirm.
• Select
Clear Chems [F8]
to clear all original chemistry selections.
Then select the desired chemistry(s) to be rerun.
4
Select
Save/Next [F10]
to:
edit the next sample.
OR
return to the Sample Program screen when all samples selected for rerun
are edited.
E010304S.EPS
