Reference Interval Setup
Inserting a Line
System Setup
IMMAGE 800 Operations Manual A11403
Page 5-22
September 2016
When the instrument status is in
Standby
, proceed with the steps below to clear
intervals and ranges from the Reference Interval/Critical Ranges screen.
Inserting a Line
This function is used to insert one line in a chemistry/calculation interval and range
definition.
The instrument status must be in
Standby
, in order to proceed with the steps below to
insert a line into an interval and range definition for a chemistry/calculation.
Step
Action
1
From the Setup screen, select
<4> Reference Interval
2
Select the button beside the chemistry/calculation to be cleared. Multiple
chemistries/calculations can be chosen.
3
Select
<Define Edit>
4
Select
Clear Ranges [F3]
.
5
Select
<OK>
to clear the intervals and ranges for the chemistry/
calculation, sample type and sex selected.
OR
Select
<Cancel>
to return to the Reference Interval/Critical Ranges screen
without clearing intervals and ranges.
6
Select another sample type and/or sex to move to other definitions within
the same chemistry/calculation. Repeat Steps 4-5.
OR
Select
Prev Chem [F9]
or
Next Chem [F10]
to move to other chemistries/
calculations. Repeat Steps 4-5.
OR
Select any icon from the menu bar to exit the screen.
Step
Action
1
From the Setup screen, select
<4> Reference Interval
2
Select the button beside the chemistry/calculation where a line is being
inserted.
3
Select
<Define Edit>
4
Select a field on the line below where a line will be inserted.
5
Select
Insert Line [F1]
. A blank line will be inserted.
(1 of 2)
