manualshive.com logo in svg

Beckman Coulter IMMAGE 800, Operation Manual, Page: 184 / 536

Share
Download
Beckman Coulter IMMAGE 800 Operation Manual Download Page 184

Deleting UDR Chemistries

 

Removing a UDR Chemistry from the Chemistry Menu

System Setup

IMMAGE 800 Operations Manual   A11403

 

Page 5-84

September 2016

Deleting UDR Chemistries

Removing a UDR Chemistry from the Chemistry Menu

This function removes the UDR chemistry from the chemistry configuration menu, 
from any configured control, and from any configured panel.  Refer to Configuring the 
Chemistry Menu, "Deleting a Chemistry" earlier in this chapter.

Deleting a UDR Definition

The Delete function deletes a UDR definition only if the chemistry has been removed 
from the chemistry menu.  When the UDR definition is deleted, the UDR reference 
intervals and all associated, non-archived patient results are deleted.  Refer to 
IMMAGE 800 Immunochemistry System 

Operation Manual

 CHAPTER 10, 

Utilities

, 

Backup/Restore.

The instrument status must be in 

Standby

 in order to proceed with the steps below to 

delete a UDR definition.

Figure 5.36

Delete User-Defined Chemistry Dialog Box

Step

Action

1

From the Setup screen, select 

<18> User-Defined Chemistries

.

2

Choose a number beside the chemistry to be deleted.

3

Select 

Delete [F2]

.  (Refer to Figure 5.36.)

4

Select 

<OK>

 to delete the chemistry.

OR

Select 

<Cancel>

 to return to the User-Defined Chemistries screen without 

deleting the chemistry.

5

Remove the reagent cartridge from the reagent carousel.

E014047S.EPS

Summary of Contents for IMMAGE 800

























































































































































































































































































































































































































































































































































Reviews:

No comments