Recalling Results by Rack and Position
Introduction
IMMAGE 800 Operations Manual A11403
Results Recall
September 2016
Page 8-5
8
Recalling Results by Rack and Position
Introduction
Results can be recalled by Rack and Position.
Recalling by Rack and Position
Follow the steps below to enter Rack and Position for recall.
Step
Action
1
Select
Results
from the menu bar. (Refer to Figure 8.1.)
2
Type the rack number(s) desired for recall in the
Rack(s)
field (up to 15
characters). Numbers can be separated by a comma as a series and/or by a
dash as a range.
3
If...
then...
one rack number is entered, Press
[Enter]
to access the
Pos(s)
field.
Type the position numbers desired for
recall (up to 15 characters). Numbers
can be separated by a comma as a series
and/or by a dash as a range.
Note: If one rack number and no
position number is entered, all positions
on the rack are automatically selected.
more than one rack number
is entered,
• All positions on each rack are
automatically selected.
• The
Pos(s)
field cannot be accessed.
4
Select the options button
<
▼
>
beside the
Data Source
field.
5
Select
Computer
to recall results in the current database stored in the hard
disk.
OR
Select
Diskette
to recall results from diskettes that have been restored into
the hard disk. (Refer to CHAPTER 10,
Utilities
instructions on how to back up and restore the database.)
NOTICE
Patient results restored from diskettes cannot be sent to the host.
6
Select a function button from the bottom of the screen.
(1 of 2)
